How Long Does It Take Professionals to Remove Tile Floors?

Removing tile floors is not just a home improvement task; it's a transformative experience that can significantly enhance the aesthetic and functionality of your living space. Whether you're updating an outdated design, repairing damage, or preparing for a new flooring installation, understanding the timeline for tile removal is crucial. Homeowners often find themselves asking: How long will this take, and what should I expect during the process? The timeline for floor tile removalcan vary widely.

Several factors impact the time required for professional tile removal, and understanding them can help set realistic expectations.

• Type of Tile and Adhesive

The material of the tile itself whether ceramic, porcelain, or natural stone can affect removal time. Ceramic and porcelain tiles tend to break more easily, while natural stone tiles like slate may be more stubborn. The type of adhesive used (thin-set mortar or mastic) also affects the ease of removal.

• Subfloor Material

If the tile is adhered to a concrete slab, it may take longer to remove due to the strength of the bond. A plywood or backer board subfloor may be easier to work with, although it can also complicate the process if the underlayment needs to be removed along with the tile.

• Size of the Area

The square footage of the area to be cleared plays a major role in the timeline. Larger rooms obviously take more time, while smaller bathrooms or entryways can be cleared more quickly.

• Tile Condition

Worn or loose tiles are easier to remove than those that are still in good condition. If the tiles are already cracking or lifting, professionals can often clear the area more quickly.

• Tools and Techniques Use

Some contractors may use heavy-duty tools like electric tile chippers or jackhammers, which speed up the process significantly. Others may rely on manual tools, which take more time but are necessary for delicate areas or rooms where minimizing dust is a priority.

While each job varies, here’s a breakdown of typical timelines for professional tile removal based on the area’s size and the type of tile.

Bathroom

• Size: 30–50 sq ft
• Estimated Time: 3–5 hours

Small Kitchen

• Size: 70–100 sq ft
• Estimated Time: 4–8 hours

Large Kitchen or Living Room

• Size: 200–300 sq ft
• Estimated Time: 1–2 days

Entire House (Tile Only)

• Size: 1,000+ sq ft
• Estimated Time: 3–5 days

These estimates assume an average team of two to three professionals using standard power tools. More advanced equipment can reduce these times by a few hours for smaller jobs or by a full day on larger projects.

Professional tile removal typically requires more than just a hammer and chisel. Here are some common tools professionals use to speed up the process:

• Electric Tile Chipper: This is one of the most effective tools for breaking up and removing tiles quickly. The electric chipper breaks the bond between the tile and the subfloor, allowing for faster removal.
• Floor Scraper Machine: For larger spaces, floor scrapers can remove both tiles and adhesive in one pass. While not always necessary for smaller jobs, these machines are ideal for big areas like kitchens or entire floors.
• Hand Tools (Chisel and Hammer): For areas with delicate subfloors or spots close to walls, manual tools provide more control and minimize the risk of damaging other surfaces.
• HEPA Filter Dust Vacuum: Tile removal creates a significant amount of dust. A vacuum with a HEPA filter can keep the workspace cleaner and reduce cleanup time.

Professionals will often use a combination of these tools, starting with larger machines for the main area and finishing with hand tools for detailed work near edges and corners.

Here’s a look at the general steps professionals take to ensure efficient tile removal, from preparation to cleanup.

• Clear the Room: Move all furniture, appliances, and obstacles out of the space.
• Protect Surroundings: Cover doorways, air vents, and nearby surfaces with plastic sheeting to minimize dust spread.

• Start at an Edge or Weak Spot: Professionals often start at a loose tile or corner, prying it up to create a starting point.
• Use an Electric Chipper or Floor Scraper: For large spaces, these tools make quick work of the tiles, breaking them free from the adhesive.

• Scrape Off Remaining Adhesive: Once the tiles are up, there’s usually adhesive left on the floor. A grinder or scraper is used to remove the excess, ensuring a smooth surface for new flooring.
• Vacuum and Clean: After the tiles and adhesive are gone, a final vacuuming clears the dust.

• Dispose of Tile and Dust: Most professionals bring bags or bins to collect the debris, making disposal easier and faster.

Even professionals encounter issues that can lengthen the time it takes to remove tile. Here are some challenges that might cause delays:

• Tight Spaces: Bathrooms or areas with a lot of corners and fixtures can slow the process, as more detailed work is needed.
• Thick Adhesive Layers: If the tile was installed with a thick layer of mortar, chipping it off can be time-consuming.
• Old or Damaged Subfloor: If the subfloor is damaged during tile removal, repairs may be necessary before laying new flooring. This adds time to the overall project.

Removing tile in a single room is typically straightforward, but removing tile throughout an entire home is a different project entirely. In whole-home projects, professionals often divide the work into stages to manage the time and labor required. Here’s a general idea of the process:

1. Sectioning Off Areas: Professionals often remove tiles in one or two rooms at a time, especially if the home is occupied during the work. This allows for the containment of dust and limits disruptions to the household.
2. Using Heavy-Duty Equipment: For larger jobs, professionals may bring in more advanced equipment like ride-on floor scrapers, which can cover large areas more quickly.
3. Additional Layers and Materials: In some cases, removing tiles can expose older flooring layers, such as linoleum or hardwood, which may need separate handling. If these layers are found, they add to the complexity and timeline of the job.

Removing tile from an entire home generally takes 3 to 5 days with a team of professionals, while individual rooms can be completed within a single day.

Time isn’t the only factor to consider. The cost of professional tile removal can vary based on factors like room size, tile type, and location. Here’s a general price breakdown for different types of jobs.

Small Room (30–50 sq ft)

• Cost: $300–$500
• Time Required: 3–5 hours

Medium Room (100 sq ft)

• Cost: $500–$1,000
• Time Required: 6–8 hours

Large Room (200–300 sq ft)

• Cost: $1,000–$2,000
• Time Required: 1–2 days

Entire Home (1,000+ sq ft)

• Cost: $3,000–$7,000
• Time Required: 3–5 days

These estimates include labor, tools, and disposal costs. Extra fees may apply for rooms with thick mortar or for homes that require extensive dust control measures.

For most homeowners, tile removal is best left to professionals. Their tools, expertise, and careful approach ensure that the job is done quickly and with minimal mess. On average, single rooms can be cleared in a day, while larger projects or entire homes take several days. By choosing professionals, you ensure that your space is ready for a new floor with a clean, level surface that will make new installation easier.

Are you ready to revamp your home or office floor? At Tear It Up Floor Removal, we specialize in efficient and thorough tile floor removal services customized to your needs. Don’t let old flooring hold you back contact us today for a free estimate and take the first step toward a fresh start!